Anticorrosive sleepers absorb oil without relying on soaking; only deep penetration can be achieved with pressure in the tank
Release Date: 2026-11-21 Visits: 5


One night, I cooked a bowl of noodles. I turned off the heat as soon as the water boiled, covered it for a few minutes, and opened the lid to find a lump of hard dough. My mother was complaining beside me, saying that instant noodles needed to be soaked, not just heated. At that time, I was not convinced, thinking that if I let it sit for a while longer, it would eventually soften. Later, I realized the difference between soaking and dipping. Soaking is letting the water touch the surface of the noodles, while dipping is letting the dough absorb the water. One is about surface interaction, while the other is about internal absorption. This analogy also holds true for those black, oily wooden sleepers beside the railway.

First, let's talk about soaking. Place the wood in an oil pool and soak it for a few hours. After soaking, take it out and it will be black and shiny. To the untrained eye, it looks impressive. However, the oil only coats the surface, and a layer of it can be scraped off with a fingernail. This layer of oil coating doesn't last long. It fades after exposure to the sun, rain, and wind. Some people think that the wood is good enough if it is soaked black enough, but in fact, the blackness is just for the eyes. Whether the wood itself can withstand it or not is a different matter.

The wooden sleeper follows a different path. The well-dried materials are stacked into the large tank one by one. Once the tank door is closed, air is first pumped out to make room. This step is similar to squeezing a sponge; only when the air-occupied space is vacated can the oil find a place to settle. Then, warm oil is poured in, and pressure is gradually applied to ensure that the oil follows, preventing the inside from being empty even though the outside is saturated. The oil follows the grain of the pine wood and penetrates all the way to the core. This slow process cannot be rushed; if the pressure is too intense, the outside may become too saturated, leaving the core empty. When the tank door is opened again, the wood remains the same, but it feels heavier in the hand. The oil has grown together with the fibers, and it cannot be removed by simply picking. When touched, the surface feels non-sticky, but the inside is moist. This is completely different from the oily layer that comes out after soaking.

There's another detail worth mentioning. Pine is used for sleepers because of its smooth grain, which makes it easy to process. However, the smooth grain also brings a problem. Oil tends to flow along the grain, making it easy to penetrate, but difficult to cross it. Therefore, before entering the tank, workers will make rows of shallow cuts on the wood. The cuts are not deep, but they create countless small entrances for the oil to flow in from all directions. The pressure inside the tank is what really makes these cuts come in handy. This task may seem troublesome, but the wood has to be left in the wild for decades, so this step cannot be skipped. When the time comes, the effort saved in this step will have to be doubled.

Once this piece of material is laid on the track, the difference can't be hidden. Trains pass over it repeatedly, and the gravel underneath gets scratched, inevitably rubbing off a layer on the surface. The piece that has been soaked loses its oily skin, while the inside remains dry. The piece pressed in the tank has a layer rubbed off on the surface, but the inside is still moist. The frozen soil on the northern track freezes and thaws repeatedly, while the dampness in the southern mountains persists all year round. The wood remains silent underneath, relying on the oil that reaches deep into its core. The mine cars pass over it repeatedly, causing the track bed to wet and dry alternately. It has also endured this for a long time. Over time, whether there is oil inside or not, the wood will speak for itself.

The wood sits in the wilderness, and no one can see what's going on inside its core. All that's visible is the outer layer of darkness. Darkness is the easiest thing to deceive people with. It can become black after being soaked, or black after being pressed. Standing on the edge of the pile, it's hard to tell who's good and who's bad. But after being laid down and used for a few years, time will sort things out on its own. The outer layer of oil will first wear off, revealing the lighter color underneath. If the inside is dry, this piece is pretty much done for. If the inside is moist, it can still be used. The root lies in the moment it enters the tank, when the oil stops on the surface and travels all the way to the core.

No matter how long a bowl of noodles is soaked, if the core remains unsoaked, it's simply not done. The same goes for wood. Whether it's black or not is for people to see, but how deeply the oil has penetrated can only be determined after several years of exposure.